REF 13946 Incubator with an inner volume of 200 liters
Advantages of C200: Approved medical device Active sterile humidity:
External water reservoir
Relative humidity vaporized at 120 °C
Minimized risk of contamination
Humidity sensor (rH)
Very short recovery times
CO2 sensor:
Dual beam infrared sensor
Very precise measurement
Long-term stable
Direct heating:
Independent over-all heating of inner walls and door
Homogeneous temperature distribution in the interior
Optional:
O2 control
Subdivided inner glass door with 6 small doors
Lockable front door
Access port
PC software LaboDat+
FEATURES
Interior Electro-polished stainless steel with coved corners Shelves and ductwork easily removable for cleaning purpose Temperature Panel heated interior chamber and door Intelligent temperature control system for dry inner chamber Active sterile Humidity supply External water supply container CO2 control Dual beam infrared sensor Measurement independent from temperature and humidity Short recovery times For all adjustable parameters through optimized microprocessor control Easy handling Menu guided Large, backlit LCD Foil keyboard Diagnostic system Optical and acoustic alarm if set point deviation or sensor defect occurs Door monitoring Remote alarm Options
O2 control: connection for N2 possible
Interfaces Remote alarm (potential free) RS485 interface for connection of optional available PC software LaboDat+
TECHNICAL DATA
Exterior
Dimensions 680 x 690 x 930 mm (w x d x h)
Interior
Volume 200 l Electro-polished stainless steel Shelves height adjustable
Temperature
Panel heated interior chamber and door Range 27 °C - 42 °C starting 5 °C above ambient temperature Stability / uniformity ± 0.1 °C / ± 0.3 °C Over-temperature alarm 32 °C - 47 °C
CO2 control
Dual beam infrared sensor Range 0 – 10 % CO2 Stability ± 0.1 % CO2
O2 control < 21 % (optional)
Measurement with galvanic sensor Connection of N2 Range 1 % – 21 % O2
Humidity
Active sterile humidity supply through vaporizing module operating at 120 °C Measuring range 0 – 98 % rH / range 60 % – 95 % rH
Supply
230 V AC, 50/60 Hz or 115 V AC, 50/60 Hz, 200 W Inlet pressure for gas 0.8 bar Ambient temperature 18 °C - 30 °C
Classification
Safety class I Class IIa for all usage according to EC-Directive 93/42/EEC EN 61010 conform
Наши партнеры
Agilent Technologies Armenia